Numerical Study on Ductility and Energy Dissipation of High-rise Composite Shear Walls

Composite shear walls; Ductility; Energy dissipation; Finite element analysis; OpenSees.

By Amirhoshang Akhaveissy¹, Kambiz Daneshvar^1*, Morteza Amooie², Dina Ghazi¹

CRPASE 2019, 5(1), 1-9

Investigation of linearInvestigation of linear seismic response of arc dams with hydrodynamic forces seismic response of arc dams with hydrodynamic forces

linear seismic response; arc dams; hydrodynamic forces.

By mohammadreza shokri Andi^*

JCER 2017, 1(8), 1-11

Improving the Performance of Conventional Concrete Using Multi-Walled Carbon Nanotubes

Nanotechnology; Mechanical Properties; Carbon Nanotube; Concrete; Multi-Walled Carbon Nanotubes.

By Mahdi Feizbahr¹, Ali shahrjerdi², Seyed Mohammad Mirhosseini², Ali Hassani Joshaghani³

EXPRESSNANOLETTERS 2020, 1(1), 1-9

Principles in the Production of Self-Healing Concrete: A Short Review

Self-healing concrete; Carbon nanotube; Concrete technology; Nano materials.

By Zulkifli Zakaria^*, Choong Tze Liang

JRSE 2021, 2021(), 1-9

Comparative Analysis of a mortar for plastering with hydraulic cement type HS incorporating nano-iron vs cement-based mortar for masonry type N

High-performance concrete; Nano-He particles; Specific surface area; Mechanical properties; Non-destructive testing; Microstructural; investigations.

By Mohammadfarid Alvansazyazdi^a,b,c, Jorge Fraga^b, Erazo Torres^b, Guevara Bravo^b, Jorge Santamaria^b, Mario Leon^b, Alexander Cadena^b, Luis Leon^b,d, Pablo M. BonillaValladares^e, Byron Heredia^b, Alexis Debut^f, Mahdi Feizbahr^g, Rodriguez Yuri^c

EXPRESSNANOLETTERS 2024, 2024(), 1-12

Analysis of The Impact of Explosive Load on Confined Square Concrete Columns Enveloped with FRP

Concrete Column; Confinement; Explosion; FRP sheets; Square Column; Finite Element Analysis; Abaqus.

By Hadi Einabadi, Amir Atashi

IJETS 2023, 2023(), 1-16

Investigating the Impact of Corrosion on Reinforced Concrete Frames with Corroded Steel Reinforcements

Corrosion; Reinforced Concrete Frames; Explosion; Abaqus; Steel Reinforcement.

By Amir Atashi, Hadi Einabadi

IJETS 2023, 2023(), 1-17

Exploring Crack Reduction in High-Performance Concrete: The Impact of Nano-Silica, Polypropylene, and 4D Metallic Fibers

Concrete; Nano-silica; Polypropylene fiber; Steel fiber; Contraction; Evaporation; Crack reduction ratio (CRR).

By Mohammadfarid Alvansazyazdi ^a,b,c, Diego Farinango^b, Javier Yaucan^b, Alexander Cadena^b, Jorge Santamaria^b, Pablo M. Bonilla^d, Mario Leon^b, Alexis Debut^e, Mahdi Feizbahr^f, Luis Torres^b,g, Byron Ayala^b

EXPRESSNANOLETTERS 2024, 2024(), 1-12

The Impact of Advanced Concrete Technologies on Modern Construction and Aesthetics

Concrete technology; Precast concrete; Colored concrete; Concrete in Architecture; Exposed concrete.

By Meqdad Feizbahr^*, Pantea Pourzanjani

JRSE 2024, 2024(), 1-9

From Innovation To Reality: How 3D Printing is Changing Construction

3D printing; sustainability; construction; concrete; innovation; customization; efficiency; reduction; waste; materials; design; regulations; costs; technology; parametrization.

By Natali Elizabeth Lascano Robalino^a, Edwin Iván Soledispa Pereira^b, Jorge Oswaldo Crespo Bravo^c, Marcelo Fabian Oleas Escalante^d, Jimenez Merchan Carmita Guadalupe^d, Angel Mauricio Espinoza Cotera ^d, Said Marcos Chara Moreira^e, Carlos Emmanuel Rivas Arteaga^d, Kamila Sayed Hoppe Chara^d

IJETS 2025, 2025(), 1-8

Nanosilica: The Secret Ingredient for Enhanced Concrete Durability

Nano silica (NS); high-strength concrete; mechanical properties; concrete durability; permeability; workability; self-compacting concrete; nanomodified materials; innovation in construction.

By Natali Elizabeth Lascano Robalino^a, Edwin Iván Soledispa Pereira^b, Jorge Oswaldo Crespo Bravo^c, Jorge Alexander Bucheli García^c,d, Marcelo Fabian Oleas Escalante^e, Jimenez Merchan Carmita Guadalupe^e, Angel Mauricio Espinoza Cotera^e, Byron Giovanoli Heredia Ayala^c

IJETS 2025, 2025(), 1-9

Revolutionizing Reinforced Concrete Design and Analysis With AI and Machine Learning: Transforming the Future of Structural Engineering

Artificial Intelligence; Reinforced Concrete; Structural Design; Design Optimization; Structural Engineering; Predictive Analysis; Construction Efficiency.

By Natali Elizabeth Lascano Robalino^a, Edwin Iván Soledispa Pereira^b, Jorge Alexander Bucheli García^c,d, Jorge Oswaldo Crespo Bravo^c, Marcelo Fabian Oleas Escalante^e, Jimenez Merchan Carmita Guadalupe^e, Angel Mauricio Espinoza Cotera^e

IJETS 2025, 2025(), 1-8

Cost-Effective Practices in Reinforced Concrete Projects

sustainability; recycled materials; technological innovation; advanced concrete; durability; carbon footprint reduction; simulations; restoration methods; steel fibers; geopolymer concrete.

By Natali Elizabeth Lascano Robalino ^a, Edwin Iván Soledispa Pereira^b, Jorge Oswaldo Crespo Bravo^c, Edgar Patricio Jácome ^d, Jorge Alexander Bucheli García^c,e, Byron Giovanoli Heredia Ayala^c

IJETS 2025, 2025(), 1-11

Utilization of Artificial Neural Network (ANN) to Predict Compressive Strength of Concrete Containing Slag and Silica fume

Slag; Silica fume; Compressive strength; Artificial Neural Networks.

By Oveys Afzali Naniz^*, Saeed Farahani Tajar, Amir Trighat

IJMSI 2015, 3(1), 6-15

Comparison and Evaluation of Fatigue Behavior of Asphalt Concrete Mixtures Containing Different Recycled Additives

By Iraj Bargegol¹, Vahid Najafi Moghaddam Gilani^1*, Reza Vatani Nezafat¹, Reihane Najafi Moghaddam Gilani²

CRPASE 2015, 1(1), 23-28

Dynamic Analysis of Composite Pavement using Finite Element Method and Prediction of Fatigue Life

Composite pavement; Fatigue life; Finite element method; Dynamic analysis; Mechanistic-empirical method.

By Benyamin Zarei, Gholam Ali Shafabakhsh^*

CRPASE 2018, 4(2), 33-37

Effect of Lateral Load Patterns in MPA in Shift and Drift Moment Resisting Concrete Frames with Irregularity of Mass in the Height

By Gholam Hossein Hosseini¹, Vahid Najafi Moghaddam Gilani^2*, Mozaffar Abdollahi Gazafroudi², Reza Kamali¹, Yaser Sotoudeh¹

CRPASE 2015, 1(1), 38-43

Effect of anodic inhibitors on corrosion of carbon steel bar reinforced concrete

Inhibitor Steel reinforced concrete Marine environment Corrosion.

By Saeid Kakooei^*a, S. Valid Jaberi^b, Kourosh Sharifi^b, Mokhtar Che Ismail^a, Abolghasem Dolati^c

IJMSI 2013, 1(2), 73-86

BEHAVIOUR OF CORROSION DAMAGED RC BEAMS WITH UDCGFRP LAMINATE

Corrosion; Ductility; GFRP; Strength; UDC.

By A. Leema Rose^a*, K. Suguna^b, P.N. Ragunath^b

RCEE 2014, 2(2), 74-79

FEM Based Study on Optimum Design of Geometry for RC Rectangular Silo Bearing Extreme Asymmetrical Static Loads

Rectangular RC Silo; RC Shell; Optimum Design of Silo; Asymmetrical Loading; Geometrical Optimization.

By Ali A. Rostam Alilou^1*, Govardhan Bhatt²

CRPASE 2018, 4(4), 77-82

Finite Element Investigation of Load Transfer Efficiency in Jointed Plain Concrete Pavements

Concrete pavement; Load transfer; Finite element method; Three-dimensional analysis; Transverse joint.

By Soroush Talebi Jouybari, Gholam Ali Shafabakhsh^*

CRPASE 2017, 3(2), 91-96

CORAL SHELL POWDER CONCRETE AND ITS STRENGTH

Concrete; Coral shell powder; partial replacement of cement; mix design; strength.

By T.S.Thandavamoorthy FIE^a, Dasarathy A. K.^b*

RCEE 2013, 1(2), 113-122

USING FUZZY LOGIC APPROACH TO FIND THE COMPRESSIVE STRENGTH OF CONCRETE

Fuzzy Logic; Compressive strength; Concrete; Supplementary materials; Correlation coefficient.

By Gupta Sakshi^*

RCEE 2014, 2(3), 120-132

Impact Assessment of Fly Ash as Partial Replacement of Cement along with Riverbed Material as Coarse Aggregate

Fly Ash; Compressive Strength; Supplementary Cementations Materials; Durability of Aggregate; Riverbed Material .

By Muhammad Imran ^a, Muhammad Sanaullah^a, Abdul Jabber Khan^b

EST 2022, 3(0), 135-144

EXPERIMENTAL TESTING OF RICE HUSK ASH CONCRETE BEAMS

Rice Husk Ash Concrete; Beams; Testing; Monotonic Loading; Capacity.

By T.S. Thandavamoorthy FIE^*, V. Ramasamy

RCEE 2013, 1(2), 139-148

PREDICTION OF SLUMP AND COMPRESSIVE STRENGTH OF CONCRETE CONTAINING FOUNDRY SAND

concrete mixes; foundry sand; Testing; artificial neural networks; fuzzy logic.

By Aggarwal Paratibha^*, Aggarwal Yogesh, Grover Kapil, subzarahmadbhat

RCEE 2013, 1(2), 149-168

Evaluation of Seismic Design Parameters for Reinforced Concrete Frames Retrofitted using Eccentric Steel Bracings

Pushover Analysis; Response Modification factor; Eccentric Steel Bracings; Seismic Design Parameters.

By Ali Sadeghpour^*, Giray Ozay

CRPASE 2020, 6(3), 173-178

PREDICTION OF COMPRESSIVE STRENGTH AND SLUMP OF CONCRETE USING ARTIFICIAL NEURAL NETWORK MODELING

Concrete mix; artificial neural network; 28 days compressive strength; Slump; Average paste thickness.

By Gupta Sakshi^*

RCEE 2013, 1(3), 177-186

BASIC PROPERTIES OF ARTIFICIAL LIGHTWEIGHT AGGREGATE BY USING INDUSTRIAL BY-PRODUCT (SILICAFUME)

Light weight aggregate; Silica fume; Pellatization; Cold bonded aggregates.

By V. Bhaskar desai^a*, A. Sathyam^b

RCEE 2013, 1(4), 195-201

Design Fabrication and Measurement of Three planar Micro-strip Antennas for UWB Applications with Linear Polarization at Base band data Transmission

Antenna; Monopoles; Bandwidth Enhancement; Fibers reinforced concrete.

By Mahdi Jalali^*a, Tohid Sedghi^b

IJETS 2013, 1(4), 200-205

RELATIONSHIPS BETWEEN COMPRESSIVE STRENGTH CEMENT-SLAG CONCRETE UNDER AIR AND WATER CURING REGIMES

Compressive strength; Mortar; Concrete; Cement- Slag Concrete; Curing regime; Relationships.

By Fathollah Sajedi^*

RCEE 2013, 1(4), 202-225

Compressive strength of high volume coal bottom ash utilization as fine aggregate in fly ash-cement blended concrete

By-products; Coal bottom ash; Fly ash; Concrete; Aggregate.

By Abdulhameed Umar Abubakar^*a, Khairul Salleh Baharudin^b

IJETS 2013, 1(4), 226-239

EFFECT OF QUARRY DUST ON WASTE PLASTIC FIBER REINFORCED CONCRETE â€“ AN EXPERIMENTAL STUDY

Waste Plastic Fiber Reinforced; concrete; Compressive Strength; Workability; Impact Energy; Quarry Dust.

By R.Venkatakrishnaiah^*, P.Rajkumar

RCEE 2013, 1(4), 234-238

Condition Assessment of RC Bridges Using Reliability Model Incorporating Health Monitoring System

RC structure; Structural reliability; Corrosion; Spatial variability; Health monitoring; Bayesian method.

By Fahimeh Jalalifar^*a, Amir Tarighat^a

IJETS 2014, 2(3), 243-256

	[email protected]
Journals *CRPASE* 2019, 5(1), 1-9 Numerical Study on Ductility and Energy Dissipation of High-rise Composite Shear Walls
Conference

	[email protected]
Journals *JCER* 2017, 1(8), 1-11 Investigation of linearInvestigation of linear seismic response of arc dams with hydrodynamic forces seismic response of arc dams with hydrodynamic forces
Conference

	Mr. Mahdi Feizbahr [email protected] School Of Civil Engineering, Universiti Sains Malaysia, Malaysia
Journals *IJETS* 2024, 1-12 Comparative Analysis of a mortar for plastering with hydraulic cement type HS incorporating nano-iron vs cement-based mortar for masonry type N *IJETS* 2024, 1-18 Enhancing Sustainable Construction: An Evaluation of Nano-Graphene's Effectiveness in Mortar Composition *IJETS* 2024, 1-12 Exploring Crack Reduction in High-Performance Concrete: The Impact of Nano-Silica, Polypropylene, and 4D Metallic Fibers WH 2020, 1-6 Investigation of noise and environmental pollution of gas and solar cogeneration systems for use in residential buildings *expressnanoletters* 2020, 1(1), 1-9 Improving the Performance of Conventional Concrete Using Multi-Walled Carbon Nanotubes
Conference

	Mr. Ali Shahrjerdi [email protected] Department Of Civil Engineering, Arak Branch, Islamic Azad University, Iran
Journals *expressnanoletters* 2020, 1(1), 1-9 Improving the Performance of Conventional Concrete Using Multi-Walled Carbon Nanotubes
Conference

	Dr. Seyed Mohammad Mirhosseini [email protected] , Department Of Civil Engineering, Iran
Journals *expressnanoletters* 2020, 1(1), 1-9 Improving the Performance of Conventional Concrete Using Multi-Walled Carbon Nanotubes
Conference

	Dr. Ali Hassani Joshaghani [email protected] Department Of Chemical Engineering, Arak Branch, Islamic Azad University, Iran
Journals *expressnanoletters* 2020, 1(1), 1-9 Improving the Performance of Conventional Concrete Using Multi-Walled Carbon Nanotubes
Conference

	Mr. Zulkifli Zakaria [email protected] , Universiti Teknologi Mara, Malaysia
Journals *JRSE* 2021, 1-9 Principles in the Production of Self-Healing Concrete: A Short Review
Conference

	Professor Mohammadfarid Alvansazyazdi [email protected] , Civil, Ecuador
Journals *IJETS* 2024, 1-12 Comparative Analysis of a mortar for plastering with hydraulic cement type HS incorporating nano-iron vs cement-based mortar for masonry type N *IJETS* 2024, 1-18 Enhancing Sustainable Construction: An Evaluation of Nano-Graphene's Effectiveness in Mortar Composition *IJETS* 2024, 1-12 Exploring Crack Reduction in High-Performance Concrete: The Impact of Nano-Silica, Polypropylene, and 4D Metallic Fibers
Conference

	Dr. Hadi Einabadi [email protected] Civil Engineering, Technical And Vocational University (tvu), Iran
Journals *IJETS* 2023, 1-17 Investigating the Impact of Corrosion on Reinforced Concrete Frames with Corroded Steel Reinforcements *IJETS* 2023, 1-16 Analysis of The Impact of Explosive Load on Confined Square Concrete Columns Enveloped with FRP
Conference

	Mr. Meqdad Feizbahr [email protected] Architectural Engineering, Islamic Azad University, Chaloos Ranch, Iran
Journals *JRSE* 2024, 1-9 The Impact of Advanced Concrete Technologies on Modern Construction and Aesthetics *JRSE* 2023, 1-12 The Evolution of Architectural Styles: From Modernism to Postmodernism
Conference

	Mrs. Natali Elizabeth Lascano Robalino [email protected] Information Systems Department, Central University Of Ecuador, Ecuador
Journals *IJETS* 2025, 1-11 Cost-Effective Practices in Reinforced Concrete Projects *IJETS* 2025, 1-8 Revolutionizing Reinforced Concrete Design and Analysis With AI and Machine Learning: Transforming the Future of Structural Engineering *IJETS* 2025, 1-9 Nanosilica: The Secret Ingredient for Enhanced Concrete Durability *IJETS* 2025, 1-8 From Innovation To Reality: How 3D Printing is Changing Construction
Conference

	[email protected]
Journals *IJMSI* 2015, 3(1), 6-15 Utilization of Artificial Neural Network (ANN) to Predict Compressive Strength of Concrete Containing Slag and Silica fume
Conference

	[email protected]
Journals *CRPASE* 2016, 2(1), 28-34 Delay Modeling of Un-signalized Roundabouts Using Neural Network and Regression *CRPASE* 2015, 1(1), 38-43 Effect of Lateral Load Patterns in MPA in Shift and Drift Moment Resisting Concrete Frames with Irregularity of Mass in the Height *CRPASE* 2015, 1(1), 23-28 Comparison and Evaluation of Fatigue Behavior of Asphalt Concrete Mixtures Containing Different Recycled Additives
Conference

	[email protected]
Journals *CRPASE* 2018, 4(2), 33-37 Dynamic Analysis of Composite Pavement using Finite Element Method and Prediction of Fatigue Life
Conference

	[email protected]
Journals *IJMSI* 2013, 1(2), 73-86 Effect of anodic inhibitors on corrosion of carbon steel bar reinforced concrete
Conference

	[email protected]
Journals *RCEE* 2014, 2(2), 74-79 BEHAVIOUR OF CORROSION DAMAGED RC BEAMS WITH UDCGFRP LAMINATE
Conference

	[email protected]
Journals *CRPASE* 2018, 4(4), 77-82 FEM Based Study on Optimum Design of Geometry for RC Rectangular Silo Bearing Extreme Asymmetrical Static Loads
Conference

	[email protected]
Journals *RCEE* 2013, 1(2), 113-122 CORAL SHELL POWDER CONCRETE AND ITS STRENGTH
Conference

	[email protected]
Journals *RCEE* 2014, 2(3), 120-132 USING FUZZY LOGIC APPROACH TO FIND THE COMPRESSIVE STRENGTH OF CONCRETE
Conference

	Mr. Muhammad Imran [email protected] Institute Of Geology, Institute Of Geology, University Of The Punjab, Lahore, Pakistan
Journals *EST* 2022, 3(0), 135-144 Impact Assessment of Fly Ash as Partial Replacement of Cement along with Riverbed Material as Coarse Aggregate
Conference

	[email protected]
Journals *RCEE* 2013, 1(2), 139-148 EXPERIMENTAL TESTING OF RICE HUSK ASH CONCRETE BEAMS
Conference

	[email protected]
Journals *RCEE* 2013, 1(2), 149-168 PREDICTION OF SLUMP AND COMPRESSIVE STRENGTH OF CONCRETE CONTAINING FOUNDRY SAND
Conference

	Dr. Ali Sadeghpour [email protected] , ,
Journals *CRPASE* 2020, 6(3), 173-178 Evaluation of Seismic Design Parameters for Reinforced Concrete Frames Retrofitted using Eccentric Steel Bracings
Conference

	[email protected]
Journals *RCEE* 2013, 1(3), 177-186 PREDICTION OF COMPRESSIVE STRENGTH AND SLUMP OF CONCRETE USING ARTIFICIAL NEURAL NETWORK MODELING
Conference

	[email protected]
Journals *RCEE* 2013, 1(4), 195-201 BASIC PROPERTIES OF ARTIFICIAL LIGHTWEIGHT AGGREGATE BY USING INDUSTRIAL BY-PRODUCT (SILICAFUME)
Conference

	[email protected]
Journals *IJETS* 2014, 1(1), 1-4 Classification Percentage Enhancement of Segmentation Indexed Image based on Clustering Algorithm *IJETS* 2013, 1(4), 200-205 Design Fabrication and Measurement of Three planar Micro-strip Antennas for UWB Applications with Linear Polarization at Base band data Transmission *IJETS* 2013, 1(2), 96-99 Efficient Color Histogram Relationship Matching Approach Based on Absolute Heavily Dependent Spatial Patterns
Conference

	[email protected]
Journals *RCEE* 2013, 1(4), 202-225 RELATIONSHIPS BETWEEN COMPRESSIVE STRENGTH CEMENT-SLAG CONCRETE UNDER AIR AND WATER CURING REGIMES
Conference

	[email protected]
Journals *IJETS* 2013, 1(4), 226-239 Compressive strength of high volume coal bottom ash utilization as fine aggregate in fly ash-cement blended concrete
Conference

	[email protected]
Journals *RCEE* 2014, 2(2), 66-73 ANALYSIS OF RISK MANAGEMENT IN CONSTRUCTION SECTOR USING FAULT TREE ANALYSIS *RCEE* 2013, 1(4), 234-238 EFFECT OF QUARRY DUST ON WASTE PLASTIC FIBER REINFORCED CONCRETE â€“ AN EXPERIMENTAL STUDY
Conference

	[email protected]
Journals *IJETS* 2014, 2(3), 243-256 Condition Assessment of RC Bridges Using Reliability Model Incorporating Health Monitoring System
Conference